Table of Contents
Advertisement
Each input name can be of 11 characters long.
6. When you have completed renaming the first input, scroll left
right column.
▲
7. Scroll up
or down
inputs you wish to rename.
Rename Formats
A default name is provided for each format such as Standard, Letterbox,
Anamorphic, HD or Custom. To enter a different name, use the cursor to high-
light Rename Formats and follow the same instructions as in the Rename
Inputs menu.
Rename Formats
Standard
Screen Setup
The Screen Setup menu is used during projector installation to position the
projected image with the screen and to select the projection mounting con-
figuration.
◀
1. Use the left
or right
ing, Rear Floor, or Rear Ceiling configurations.
The selection process has a built-in delay to perform the function, so it may
appear to be slow during executing your selections.
Screen Setup
Mounting
Image Setup
The Image Setup menu allows you to position and adjust the video input im-
age size. Video image parameters vary from different video sources and may
require adjustment to properly fit the screen.
To Adjust the Video Image Size and Position:
1. Select either the H-Position, H-size, V-Position or V-size option in the Image
Setup menu.
▲
2. Use the up
or down
H-Position and V-Position functions move the picture up/down or left/right
without changing the image size. H-size and V-size functions expand (or shrink)
the image size to fit on the screen.
▼
the default list to repeat the process for all of the
Standard
▶
button to select from the Front Floor, Front Ceil-
Front Floor
▼
buttons to set the desired image size or position.
19
◀
to exit the
Advertisement
Table of Contents
