Using Bluetooth Devices - Gigaset SL780 User Manual

Using Bluetooth devices

To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
¢
with ( page 59).
§Save§
Using Bluetooth devices
Your Gigaset SL78H handset can commu-
nicate wirelessly via Bluetooth™ with
other devices using this technology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the hand-
set.
You can register 1 Bluetooth headset to
the handset. You can also register up to 5
data devices (PC, PDA) to send and receive
directory entries as vCards or exchange
data with the computer (
To use the phone numbers, dialling codes
(country and area code) must be stored in
¢
the directory ( page 66).
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Please note
u
You can operate headsets on your
handset that have the headset or
handsfree profile. If both profiles
are available, the handsfree profile
will be used to communicate.
u
It can take up to 5 seconds to create
a connection between your handset
and a Bluetooth headset. This
applies both when a call is accepted
using the headset or transferred to
the headset, and when a number is
dialled from the headset.
60
¢
page 76).
Activating/deactivating Bluetooth
mode
ò
¢ ¢
v
Activation
Press to activate or deactivate Blue-
§Change§
tooth mode (³ = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated
¢
( page 2):
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note
u
If you register a headset, any head-
set that is already registered will be
overwritten.
u
If you would like to use a headset
with your handset that is already
registered to another device (e.g. to
a mobile phone), please deactivate
this connection before you start the
registration process to the Gigaset.
ò
¢ ¢
v
Search for Headset / Search for
DataDevice
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
Press the display key.
§Options§
Trust Device Select and press
~
Enter the PIN for the Bluetooth
device you want to register
and press
The device is saved in the list of known
devices.
.
§OK§
.
§OK§