Specifications - Sony VPL-ES1 Brochure & Specs

SPECIFICATIONS

Optical
Projection System
Panel
Projection lens
Lamp
Screen coverage
Light Output
Throwing Distance
Signals
Color System
Resolution
Acceptable Signals
General
Speaker
Power Requirements
Power Consumption
Operating Temperature
Operating Humidity
Dimension (WxHxD)
Weight
Heat Dissipation
INPUT/OUTPUT
Input
Output
Safety Regulations
Supplied Accessories
Control Panel
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/projectors
MK10074V1IW03SEP
DI-0061
3 LCD panels, 1 lens projection system
Super high aperture 0.62-inch TFT LCD 1,440,000 pixels (480,000 pixels x 3)
1.2 times F2.2 to 2.4 f18.0 to 21.6mm
185W UHP
40'' to 150'' (measured diagonally)
1500ANSI lm (lamp mode high) (Standard: Approx. 1300 ANSI lm)
40-inch : 1.1 to 1.4 m (3.6 to 4.6 feet)
60-inch : 1.7 to 2.1 m (5.6 to 6.9 feet)
80-inch : 2.3 to 2.8 m (7.5 to 9.2 feet)
100-inch : 2.9 to 3.5 m (9.5 to 11.5 feet)
120-inch : 3.5 to 4.2 m (11.5 to 13.8 feet)
150-inch : 4.4 to 5.3 m (14.4 to 17.4 feet)
NTSC , PAL, SECAM, NTSC
3.58
Video 600TV lines
RGB 800 x 600
Computer fH: 19-72 kHz, fV: 48-92 Hz (up to XGA (fV: 85 Hz))
Video RGB/Component 50/60 Hz, Composite video, Y/C video, 480/60 i, 575/50 i
HDTV: 1080/60 i, 480/60 p, 575/50 p, 1080/50 i, 720/60 p, 720/50 p, 540/60 p
Mono 1 W (max.) x 1
AC 100 to 240 V, 50/60 Hz
Max 250 W
Standby 4.6 W
0 to 35 degrees Celsius (32 to 95 F)
35% to 85% (no condensation)
mm 295 x 78 x 238
inch 11 5 / x 3 1
8
kg Approx. 2.8 kg
lb Approx. 6 lbs., 3 oz.
853.1BTU
RGB/Component Analog RGB (HD D-sub 15 pin x 1)
S-Video S-Video (Mini DIN 4pin x 1)
Composite Composite video (RCA pin x 1)
Audio mono (stereo mini x 1)
Analog RGB (HD D-sub 15 pin x 1)
UL60950, cUL (CSA No.60950), FCC Class B, IC Class B,
NEMCO (EN60950), CE (LVD, EMC), C-Tick
Remote Commander (RM-PJ2), Lithium battery, HD D-sub 15 pin cable,
Soft case, Air filter, Operating Instructions, Quick reference sheet, Security label
Connector Panel
, PAL-M, PAL-N
4.43
/ x 9 3 /
8 8
· Halogenated flame retardants are not used in cabinets.
· Halogenated flame retardants are not used in printed wiring boards.
· Lead-free solder is used for soldering.
· Polystyrene foam for the packaging cushions is not used in packaging.
©2003 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony and Remote Commander are registered trademarks of Sony.
Printed in USA (10/03)