TC-Helicon VoiceTone Harmony-M Product Manual page 9

Step 7:
While singing through your microphone, raise the Input
Knob until the Input Light turns green, sometimes
orange on louder parts, but never red.
Mic input Output Footswitch
Input Humanize
Tone
3
MIDI in
Power
FX Harmony
Step 8:
In preparation for your first listen, check that the LEDs
conform to the status shown in the boxes below. You
can press the button associated with the LEDs to change
them if necessary.
Mic input Output
Input
Tone
Preset
3
Press to load 1
Preset 1 if it's
not already
48V
loaded
Manual Double
Press so
LED is ON
Quick Start
Press to light
LED
Footswitch MIDI in Power
Humanize FX Harmony
Hall Higher
Room High
Echo Low
Slap Lower
Combi Bass
SFX Octave
Stereo
FX Voice 1 Voice 2
Press so
LED is OFF
9