Page 1
POWER MXR M-120 Auto Q uses one 9-volt battery. The battery access is through the bottom of the pedal. The Auto Q uses the Dunlop ECB03 Adapter (ECB03E for Europe), a 9-volt DC regulated AC adapter. Plug polarity is positive on the barrel and negative in the center. Note: Battery must be...
Page 2
CONTROLS Footswitch toggles effect on/bypass (red LED indicates on). 3-way Band Switch selects favored frequency range of effect. Range Knob controls frequency floor of effect. Volume Knob controls overall effect volume (inactive in bypass mode). Decay Knob controls dropoff decay of wah effect. The “Q”...
Page 3
DIRECTIONS To set up the MXR M-120 Auto Q, plug your instrument into the Input jack and your amplifier into the Output jack. Be sure the Footswitch is in the Off position (red LED off), or Bypass mode. Set all knobs except Blend to their straight up, or 12 o’clock positions, and set the Blend Knob all the way off (counterclockwise).
Page 4
SAMPLE SETTINGS To help you get started using your M-120 MXR Auto Q stomp box, we’ve provided a roadmap of knobs and switch settings used by top artists. You’re set to play with any of these settings or find your favorite and experiment from there.
Need help?
Do you have a question about the M-120 MXR Auto Q and is the answer not in the manual?
Questions and answers