Installation Procedure ������������������������������������������������������������������������5 Time Settings; Plan For Installation Location; Viewing Angle������������������������������������������������������������������������������������ 5 Live View Settings; Weather Conditions - TRENDnet TV-IP310PI User Manual

TV-IP310PI User's Guide
Installation Procedure
There are a number of factors involved in successful camera
installation. Follow the suggested installation steps and go through
the check lists. This guide will help you make your camera installation
smooth and easy�
• Plan for installation location, see page 5 (next
paragraph)
• Setup Your Camera with CD, see page 6
• Hardware Installation, see page 9

Plan for installation location

Viewing angle
The TV-IP310PI is a bullet camera with a focused viewing angle (700
horizontal and 520 vertical) that provides non-distorted and detailed
images. Choose the location where has good a angle to shoot the image
you expect to see. The motion detection area should also be considered
when installing the camera.

Weather Conditions

The TV-IP310PI is a small bullet camera, which fits most installations
indoor and out door� The camera can work under a wide range of
weather conditions. For severe weather conditions, a camera housing
with temperature and moisture control is recommended. Using the
camera in milder weather conditions will help extend the camera's life
and preserve the quality of the camera image.
© Copyright 2014 TRENDnet. All rights reserved.
• Moisture: Avoid damp or moist environments whenever you can�
The TV-IP310PI is an IP66 grade water proof camera, and it will work
in moist environments. However, rain may affect the picture quality,
especially at night, water may reflect the light from the infra-red
illumination and degrade picture quality.
• Temperature: TV-IP310PI works within a specified temperature
range. Areas with severe temperatures should be avoided when
installing the camera. It's recommended that you use an enclosure
with a heater and blower if you plan on using this camera outside of
the specified temperature range.
• Sunlight: Avoid direct sun light exposure. Direct sun light will
damage the image sensor. If sunlight is necessary for your viewing
purposes, provide protection for the image sensor.
• Lighting: Consider installing your camera faces the same direction
of the light sources. Shooting images with top-down position
outdoor or next to the existing light source are good choices. Avoid
the light source if it creates a shade that darkens the viewing area.
Installation
5