JVC KD-HDR40 Instructions Manual page 9

1
Select "FM" or "AM."
2
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for a station manually—Manual Search.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST indicator
Ex.: When receiving a conventional FM
station
When receiving HD Radio
multicast channels...
Channel number
Select your desired channel.
• "LINKING" appears while linking to a multicast
channel.
Searching for HD Radio stations
only
[Hold]
When a station is tuned in, searching stops.
Hold either one of the buttons until "M" flashes on the display, then press it
repeatedly.
lights up on the display.
Selected frequency
Ex.: When receiving an HD Radio station
Lights up when a digital audio is broadcast.
Flashes when an analog audio is broadcast.
Station Call Sign
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
1
Call up the SET menu.
[Hold]
2
Select "TUNER."
[Turn] = [Press]
3
Select "MONO."
[Turn] = [Press]
4
Select "MONO ON."
[Turn] = [Press]
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure to select "MONO OFF."
OPERATIONS 9