Troubleshooting - Honda WD30X Owner's Manual

Honda water pump user manual
Hide thumbs Also See for WD30X:
Table of Contents

Advertisement

9. TROUBLESHOOTIN%
When the engine will not start:
1. Is the engine switch
ON?
2. Is there enough fuel?
3. Is the fuel valve on?
4. Is gasoline reaching the carburetor?
To check, remove the drain screw and turn the fuel valve on.
Fuel should flow out free.
m
If any fuel is spilled, make sure the area is dri before testing the
spark plug or starting
the engine.
Fuel vapor or spilled fuel may ignite.
DRAIN
SCREW
5. Is there a spark at the spark plug?
a. Remove the spark plug cap. Clean any dirt from around the spark plug
base, then remove the spark plug.
b; Install the spark plug in the plug cap.
c. Turn the engine switch
on.
d. Ground the side electrode to any engine ground, pull the recoil starter
to see if sparks jump across the gap.
e. If there are no sparks, replace the plug.
If OK, install the new plug and try to start the engine according to the
instructions.
6. If the engine still does not start, take the pump to an authorized
Honda
water pump dealer.
24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd20x

Table of Contents