Yamaha Motif-Rack XS Owner's Manual page 28

Voice Mode
3.
Select a Voice with the Encoder knob or Cursor [
M
[ ] buttons.
n
You can use the Encoder knob or Cursor [
the Voice number. This operation lets you call up Voices in
subsequent or previous Banks.
n
To quickly move forward through the program (Voice) numbers in
10-step jumps, simultaneously hold down the Cursor [
press the Cursor [
reverse, use the opposite operation: simultaneously hold down the
M
Cursor [ ] button and press the Cursor [
TIP
Selecting Voices by receiving MIDI messages
You can select Voices on this instrument from your DAW software
by specifying the following MIDI messages. To do this, the
following three MIDI messages must be transmitted to the
MOTIF-RACK XS.
• Bank Select MSB (Control #0)
• Bank Select LSB (Control #32)
• Program Change
For example, transmit the following MIDI messages to select the
Voice of program number 12 in the PRE2.
1.
Transmit a Bank Select MSB (Control #0) value of 63.
2.
Transmit a Bank Select LSB (Control #32) value of 1.
3.
Transmit a Program Change value of 12*.
* If you are using a DAW software that has a Program Change value range of 0
to 127, transmit a Program Change value of 11 to the MOTIF-RACK XS.
For details on what values are assigned to the Voice Bank/
Number of this tone generator, see the "MIDI Data Format" in the
separate Data List. Also, for specific Program Change numbers
and the corresponding Voices, refer to the separate Data List.
n
Set the MIDI Channel to the same channel as the "Receive Ch (Basic
Receive Channel)" parameter (page 102).
n
When MIDI messages are received in the Voice mode, the [VOICE]
button lamp flashes. This provides a quick way to check whether MIDI
data is being received or not.
4.
Play the connected keyboard.
The selected Voice sounds in response to the incoming
MIDI data. Let's play some Voices here.
n
Keep in mind there is also an Audition function (page 16) that lets
you listen to and audition each Voice as you select it.
28
MOTIF-RACK XS Owner's Manual
L
M
]/[ ] buttons to select
L
] button and
M ] button in the Play display. To do the same in
L
] button.
L
]/
Using the Category Search function
The MOTIF-RACK XS Voices are conveniently divided into some
Categories, irrespective of their bank locations. The categories
are divided based on the general instrument type or sound
characteristics. The Category Search function gives you quick
access to the sounds you want.
1.
Press the Encoder knob in the Voice Play display.
The Category Search dialog appears.
n
Press [EXIT] to close the Category Search dialog.
2.
Move the cursor position to "Main" (Main Category)
with the Cursor [
knob to select the Main Category.
3.
Move the cursor position to "Sub" (Sub Category)
with the Cursor [
knob to select the Sub Category.
4.
Press the [ENTER] button, Encoder knob, or Cursor
>
[ ] button to actually call up the Category.
The Voice List of the selected category is shown.
Currently selected Main
Category and Sub Category
5.
Select the Voice with the Cursor [
Encoder knob.
If you want to change the Category, press the Cursor [<]
button or [EXIT] button and go back to step 2.
6.
Press the [ENTER] button or Encoder knob to
actually call up the Voice.
This closes the Category Search dialog.
Main Category
Sub Category
L
] button, and turn the Encoder
M
] button, and turn the Encoder
Favorite check box
Voice list of currently
selected category.
L M
]/[ ] buttons or