Xantech XtraLink IP Quick Start Manual

Fully functional stand-alone ip-to-serial remote access controller with internal web server

Hide thumbs Also See for XtraLink IP:

Download this manual See also: User Manual

Xantech XtraLink™ IP -

The Xantech XtraLink™ IP is a fully functional stand-alone IP-to-serial remote access controller with internal

web server. In addition, it functions as a remote expansion port for the XANTECH series of IP-based control

systems. Featuring an RS-232/422/485 port, a POE capable LAN port, and a MicroSD card slot, the

XANTECH XtraLink™ IP is the ideal solution for providing LAN based control for serial devices.

PACKAGE CONTENTS

• XANTECH XtraLink™ IP

• 12V / 14.4W DC power supply

WEB INTERFACE

To Connect to XANTECH XtraLink IP Web Page:

1. Apply Power

2. Connect LAN

3. Open Web Browser

4. Enter IP address of the Xantech in address bar (default = 192.168.1.10)

5. Login as follows:

• User - admin

• Password - admin

XANTECH XTRALINK IP WEB INTERFACE MENU:

General Settings:

System Info and set Password

Network Settings:

Set IP Static / DHCP / Host Name

Port Settings:

Set Baud Rate and Communication Method

Quick Start Guide

To restore unit to default settings:

- Power-up XtraLink™ IP

- Press-n-hold reset button for >= 5 seconds.

- IP Address now static at 192.168.1.10 / 255.255.0.0

Page 1: Quick Start Guide
The Xantech XtraLink™ IP is a fully functional stand-alone IP-to-serial remote access controller with internal web server. In addition, it functions as a remote expansion port for the XANTECH series of IP-based control systems. Featuring an RS-232/422/485 port, a POE capable LAN port, and a MicroSD card slot, the XANTECH XtraLink™...
Page 2 SPECIFICATIONS CONNECTIONS RJ45 – Network Connection o Power over Ethernet capable o 48VDC ( 37-57V range) 9-pin D-sub – RS-232: Port RS-232 RS-422/485...
Page 3 6. Enter the Static IP Address, Subnet Mask and Default Gateway for the XTRALINK IP unit 7. Enter a HostName if required. Note: if using multiple IPRS232 XTRALINK IP’s make sure each unit has a unique IP address and Host Name. 8. Click Apply Changes to save current settings.
Page 4 3. Select Add Action 4. Select Telnet under the Type Drop Down menu. 5. Enter the IP Address of the XTRALINK IP as configured above in the Output to field. Enter the Serial String to be sent in the Output Value field.