Multi-Room Controller Hand-held Remote DESCRIPTION The MRCREMPRP (MRC Remote) is a specialized remote that is capable of interfacing with Xantech Multi-Room Controller products. This provides an added-value product perfect for any multi-room installation. The MRC Remote is designed to provide keypad control in an easy, handheld remote. In simple terms, it can be described as a held-held, multi-room controller keypad.
Page 2
QUICK START Installing Batteries 1. Turn the unit over and remove the battery cover. Press the battery cover Tab in towards the battery cover and lift up. 2. Install 2 “AAA” batteries (Alkaline recommended). Be careful to observe correct polarity for each battery as shown and as marked on the inside of the battery compartment.
Page 3
Group Code Open Open Close Open Open Close Close Close Figure A Programming M1, M2, M3, M4 Buttons To utilize the M1 thru M4 buttons, the multi-room controller must be programmed via Dragon-Drop IR software. The Dragon-Drop IR programming software comes with the MRC88/44 and MRAUDIO8X8/4X4 controllers.