Advertisement
Quick Links
Advertisement
Related Manuals for Xantech XVC100
Summary of Contents for Xantech XVC100
-
Page 2: Features And Benefits
Installation Instructions XVC Series Volume Controls Xantech’s premier product line of XV volume controls are in-wall mountable stereo speaker volume control with impedance matching capability. From one to eight pairs or stereo speakers may be driven from one stereo power amplifier, using an equal number of XV volume controls. -
Page 3: Installation Requirements
Installation Requirements ⅛ You will need at the very least, a ” slotted screwdriver, a ¼” slotted screwdriver, wire cutters and wire strippers. The recommended speaker wire to be used is 16-gauge stranded copper speaker wire. For runs longer than 100 feet, we recommend 14-gauge stranded copper speaker wire. - Page 4 Impedance Jumper Settings for Identical How to use the impedance jumper setting chart: 1) Determine the minimum amplifier impedance (typically either 4- or 8-Ohm). This information can usually be found next to the speaker outputs located on the receiver or amplifier. If in doubt, consult the receiver and/or amplifier instruction manual.
-
Page 5: Changing The Face Plate
Example 1: Two pairs of 8 Ohm ceiling speakers are to be used with two volume controls, all driven by a single amplifier rated for 8 Ohm minimum safe operating load impedance. 1) Refer to “CHART A”, 8 Ohm Minimum Amplifier. 2) In the first column, find “8 Ohms”. - Page 6 Single Zone, Single Speaker Pair Volume Control Application...
- Page 7 Multiple Zone, Single Speaker Pair Volume Control Application...
- Page 8 Single Zone, Single Speaker Pair Volume Control and IR Receiver Application Note: Applies to Model XVCD100IR, XVCS100IR only...
- Page 9 CB18 Connecting Block (not included) The CB18 provides a convenient way to parallel many wires onto a 4 conductor bus. You can easily connect many home run leads from volume controls to the output terminals of a main amplifier. The CB18 features the following: Nine 4-terminal plug-in connectors on a 4-conductor bus.
-
Page 10: Warranty Statement
Xantech 5 Year Limited Warranty (Effective for products sold after July 1, 2006) Xantech Corporation (“Xantech”) warrants to the holder of a valid proof of purchase as the first end-user purchaser (“You”), its products to be free from defects in materials and workmanship for the periods specified above from the date of purchase.