Sharp VL-Z700S-T Service Manual page 7

4.
· Disconnect the six FPCs of the head amp circuit board
unit.
· Remove the two screws ((a) XiPSN17P02000) and
remove the head amp PWB unit.
· Remove the three screws ((w) LX-BZA022WJFN) and
remove the screw ((k) LX-BZA023WJFD).
· Remove the mechanism with the cassette lid opened.
5.
· Remove the screw ((x) LX-HZ0050TAFN).
· Remove the two screws Z800E-T: ((d) XiPSF17P02000) or Z700/
Z800S-S/E-S/Z900/Z950: ((a) XiPSN17P02000) and remove the
cassette lid.
6.
· Remove the two screws ((d) XiPSF17P02000).
· Disconnect the connector of the speaker while removing the Lid upper
cover with the cassette control lid opened.
· Remove the screw ((a) XiPSN17P02000) and remove the lock guide
cover.
· Remove the speaker.
Mechanism
w
Lid upper cover
d
7
VL-Z700S-T
VL-Z800S-S/E-S/E-T/Z900H-S
VL-Z950S-S/E-A/E-S/E-T/E-W
w w
k
Head amp PWB unit
a
x
Cassette lid
a d
or
a or d
a
Lock guide cover
d
Connector
Speaker
a
FPC