Sharp VL-Z700S-T Service Manual page 35

DV INTERFACE (IEEE1394) ID SETTING
This unit has a DV interface function conforming to IEEE1394. Each unit therefore must have its own ID number. Because this ID is
2
written into the E PROM (IC705) in the main PWB, it is necessary to newly write the ID newly when this IC is replaced.
Address 180, 17F, 17E
Setting rating ID number obtained from the URL below
Setting method 1) Refer to the ID code application below.
2) Place the data acquired in step (1) at the corresponding address in the VCR mode.
* Download an ID number and write it on the main unit according to the notice from the AV System Group "Issue
Examples • Replacement of E
I
ID code application
1. Connect with the EUI48/64 ID code control system.
(1) Start the Internet Explorer or Netscape Navigator.
(2) Access the following address.(URL: http://www.rcg.kami.sharp.co.jp/quics/index.html)
Select "EUI48/64 ID code control system" among the "Service" items.
Note: If you want to establish a connection by directly inputting the URL, please input the following.
URL:http://www1.rcg.kami.sharp.co.jp:7000/adrs_agt/adrs_dba/ide00010.main
The login screen will appear.
(3) Input the [User ID] and [Password]. Click on [Login].
(4) Click on [EUI 64 (IEEE1394)] from
[1. Application of acquisition of application for ID].
No.S8-001".
2
PROM (IC705 in main PWB)
Click
Mode VCR
35
VL-Z700S-T
VL-Z800S-S/E-S/E-T/Z900H-S
VL-Z950S-S/E-A/E-S/E-T/E-W