FEATURES
Work Light
HS1132
HS724, HS928
The light comes ON while the
engine is running, and it goes OFF
when the engine stops. The light
does not come ON when the
engine switch is turned ON unless
the engine is started. The light can
be adjusted up or down.
Snow Clearing Bar (equipped type)
If the snow discharge chute or
snow blowing mechanism
becomes restricted, stop the
engine and use this bar to remove
the obstruction.
After clearing the obstruction,
wipe the bar clean, and store it in
the holders.
Before removing the obstruction,
be sure to stop the engine, and
make sure that all rotating parts
have come to a complete stop.
Remove the spark plug cap from
the spark plug.
Standard
Optional Kit
CONTROLS & FEATURES
WORK LIGHT
SNOW CLEARING BAR
HOLDERS
17