Pioneer XDJ-AERO Connection Manual page 9

2-2. Effect (FX Single Mode)
SAMPLE LAUNCH
No XDJ-AERO buttons
indicator status
Lit dimly
e BEAT control
Lit brightly
Lit dimly
FX SELECT
f
(TRANS)
Lit brightly
Lit dimly
FX SELECT
g
(FLANGER)
Lit brightly
Lit dimly
FX SELECT
h
(ECHO)
Lit brightly
Lit dimly
FX SELECT
i
(ROLL)
Lit brightly
Lit dimly
j LEVEL/DEPTH
Lit brightly
3. Mixer
No
k TRIM control
l EQ [HI] control
m EQ [MID] control
n EQ [LOW] control
o FILTER control
p Channel fader
q HEADPHONES CUE * 4
r Crossfader
s Crossfader curve
t AUTO MIX
4. Others
No
u INFO/UTILITY
o INFO/UTILITY
*2 Operates when the XDJ-AERO's mixer mode is set to "PC". When the mixer mode is set to "PC", deck switching is possible with the
INFO/UTILITY button and the four decks can be operated. To display TRAKTOR decks C and D, check "Show C&D" at "Preferences"
"Decks Layout" "Deck Layout". To display the TRAKTOR mixer, check each of "EQ + Fader", "Filter + Key + Gain + Cue + Balance" and
"Crossfader" at "Preferences"
*3 Operates as shown on the table below according to the slot status.
empty
loaded
playing(One-shot)
playing(Looped)
*4 When monitoring the sound over headphones, do so with the HEADPHONES MIX knob in TRAKTOR turned all the way to the CUE side.
• The amount of change in the sound and playing speed when such operations as scratching and pitch bending are performed differs
from when operations are performed on the XDJ-AERO alone.
• The various functions of TRAKTOR PRO 2 can be assigned to buttons on the XDJ-AERO by changing the mapping. For details, refer to
the TRAKTOR PRO 2's operating instructions.
• MIDI channels 1 to 7 are used with this unit's MIDI mapping file, so when using another CDJ player or a device of a different brand
connected to the computer by USB cable together with this unit, set the other device(s) MIDI channel(s) to "8" or higher.
• For instructions on setting the MIDI channel, see the respective device's operating instructions.
Track Decks (Decks A and B)
Function
Dry/Wet Single
Dry/Wet Single
Effect On/Off
Hot Cue1
Effect Parameter Reset —
Hot Cue2
Effect Button1
Hot Cue3
Effect Button2
Hot Cue4
Effect Parameter1
Effect Parameter1
XDJ-AERO buttons
THRU
XDJ-AERO buttons
"Mixer" "Mixer Layout".
Slot status
When SHIFT button
is on
Effect Parameter2 Dry/Wet Single
Effect Parameter2 Sample Volume Slot1
— Effect On/Off
Delete Hot Cue1 Slot1 *
Effect Parameter Reset —
Delete Hot Cue2 Slot2 *
— Effect Button1
Delete Hot Cue3 Slot3 *
— Effect Button2
Delete Hot Cue4 Slot4 *
Effect Parameter3 Effect Parameter1
Effect Parameter3 Sample Volume Slot2
Input Gain
EQ (Hi)
EQ (Mid)
EQ (Low)
Filter
Channel Fader
Monitor On/Off
Cross Fader
Thru
Smooth
Sharp
Cruise Mode On/Off
DECK Change A C
DECK Change B D
Load From Deck
Play
Stop
Mute/Unmute
9
Remix Decks (Decks C and D) *
When SHIFT button
Function
is on
Effect Parameter2
Sample Volume Slot3
—
3
Load From List
3
Load From List
—
3
Load From List
—
3
Load From List
Effect Parameter3
Sample Volume Slot4
Mixer
Function
Deck & Mixer
Function
Function
<DRX1024-A>
2