Polycom CX 700 Quick Start Manual page 2

Connect Cables
1. Connect Handset, as shown below.
2. Connect Network and Power, as shown below.
Connect the network cable to your ethernet port, and then plug the other end of the
network cable into the network port on the back of the Polycom CX700. Power can
be supplied to the Polycom CX700 via Power over Ethernet.
Note: If Power over Ethernet is unavailable, supply power to the Polycom CX700
using the country-specific power cable.
Country-Specific
Power Cable
(If Power over Ethernet
is unavailable)
Note: Ensure your
network cable is
connected to the
network port.
Features
Hookswitch
Speaker
Speakerphone
Key
Polycom CX 700 Quick Start Guide
2
Finger Reader
Volume
Headset
Key
Key Pad
Select
Microphone Mute
1
LCD Display
Help Key
Status
Indicator
Scroll Wheel