Honda Generator EB6500X Owner's Manual page 64

Wheel Kit Installation
1. Install the two wheels on the axle shaft using the washers and cotter
pins.
2. Install the axle assembly on the generator using four 8
flange bolts and 8 mm flange nuts.
3. Install the two stands on the under frame using four 8
flange bolts.
TORQUE: 17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m) −
8 16 mm FLANGE BOLT (4) ×
STAND (2)
62
− −
8 mm FLANGE NUT (4)
LONGER
8 16 mm FLANGE BOLT (4) ×
AXLE
WHEEL (2)
4.0 30 mm COTTER PIN (2) ×
20 mm WASHER (2)
× 16 mm
× 16 mm
GENERATOR
SIDE