Freecom NETWORK STORAGE CENTER/NETWORK MEDIA CENTER User Manual page 9

1. Reset button
The Reset button has different functions, depending on how long the button is
pressed:
Press "Reset" LED Status
button for
1 - 3 seconds white LED blinking slowly
4 - 7 seconds white LED blinking fast
8 - 9 seconds white LED off
10 - 15 seconds white LED blinking very fast
> 15 seconds white LED off
1.4 Footstand
Use the two rubber foot stands that come with the device to place the Network Storage
Center / Network Media Center in upright position.
Hardware Installation
Action
Hardware will be resetted, all user
and networks settings will be kept
Device is shut down
No action, "Reset" button can
be released now without any
action to be done
Network settings are set to
factory default:
- IP address = DHCP
- Administrator password =
admin
- Host name = NetworkCenter
- Workgroup name =
WORKGROUP
Note: all user settings will be kept!
No action, "Reset" button can
be released now without any
action to be done
EN
1