Freecom NETWORK STORAGE CENTER/NETWORK MEDIA CENTER User Manual page 29

Network Storage Center / Network Media Center Functions
6.1.4 Configure the network settings
EN
Go to Configuration -> Configure the network settings.
When selecting "Configure the network settings", the Network Address Wizard will open.
6
Click on "Begin Wizard" to start the network configuration.
You may configure the network settings either automatically or manually.
Automatic configuration
When selecting "Automatic", the Freecom Network Storage Center / Network Media
Center will obtain an IP address automatically from a DHCP server (usually from your
router). Click on "Next" to proceed.
In the next step, click on "Finish". Your Network Storage Center / Network Media Center
will be rebooted afterwards.