Extsw Setup; Character Entry - Kenwood KVT-819DVD Instruction Manual

When recalling the memorized settings: Setting EXT SW
Control 1
(EXT SW1)
Touching the screen displays a confirmation
message. Touch _ . To cancel recalling,
touch_.
When clearing the currently memorized
settings:
OJ
Sets the name of the external device. See
<Character Entry> (page 60) for information
on how to enter the name.
[1]
Sets the power signal output mode.
(12)
EXT SWl : Pulse, EXT SW2: Level)
Pulse: Generates a single power signal
pulse.
Level: Continues output of high power
signal.
Setting EXT SW Control 2 (EXT SW2)
The setup method is the same as IIEXT SW1 11 .
Sets to turn output on/off each time the
button on the EXT SW Control screen is
pressed.
[l]
Sets the Pulse signal output time.
Outputs 500ms when 111
11
is set. Increases
by 200ms with each step. Up to 100 steps
can be set.
[I]
Returns to the original screen.
Quit memorization/recalling of settings
Display the EXT SW SETUP screen
Touch [Ext SW SETUP] in the SETUP Menu
(page 70).
Perform EXT SW Setup
Touching the screen displays a confirmation
message. Touch _ . To cancel clearing,
touch_.
Setting up power specification of the external
device for which the power is controlled from
this unit.
EXT SW Setup
English 87