Table of Contents
Advertisement
Before Operation
Initial Settings
By using the Setup menu, you can make various adjust-
ments to items such as picture and sound. You can also
set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
item, see pages 12 to 15.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press
on the remote control.
To go back to the previous level:
Press
on the remote control.
General Operation
1
Press SETUP.
The setup menu appears.
2 2
Use
/
to select the desired option then
press
to move to the second level.
The screen will be shown the current setting for the
selected item, as well as alternate setting(s).
3 3
Use
/
to select the second desired option
then press
to move to the third level.
4
Use
/
to select the desired setting then
press SELECT/ENTER to confirm your selection.
Some items require additional steps.
5
Press SETUP or PLAY to exit the setup menu.
LANGUAGE
LANGUAGE
OSD
Disc Audio
Disc Subtitle
Disc Menu
OSD
Select a language for the Setup menu and on-screen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
Original:
Refers to the original language in which the
disc was recorded.
Other:
To select another language, press number but-
tons to enter the corresponding 4-digit number accord-
ing to the language code list on page 27. If you enter
the wrong language code, press CLEAR on the remote
control.
12
DISPLAY
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
Progressive Scan
Progressive Scan Video provides higher quality pictures
with less flickering.
If you are using the Component Video jacks for connec-
tion to a TV or monitor that is compatible with a pro-
gressive scan signal, set Progressive Scan to On.
To Turn ON progressive scan:
Connect component out of the DVD to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select "Progressive Scan" on the DISPLAY menu
then press
English
Original
2. Select "On" using the
Off
3. Press SELECT/ENTER to confirm your selection.
Original
The confirm menu will appear.
4. When the confirm menu appears on your screen
"Cancel" is highlighted as default. Use the
buttons to highlight "Enter".
Move
Select
5. Pressing SELECT/ENTER will set the player to
Progressive scan mode.
DVD
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "no dISC" is displayed in the display
window
2) Press STOP ( x ) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be vis-
ible on a conventional analog TV or monitor.
DISPLAY
TV Aspect
Display Mode
Progressive Scan
DVD
DVD
DVD
.
/
buttons.
Caution
16 : 9
Widescreen
Off
Move
Select
/
Advertisement
Table of Contents
