Aqua logic/pro logic spaside remote control (9 pages)
Summary of Contents for Goldline AQL-WW-RF-PS-4
Page 1
Wireless Remote Display Aqua Logic Aqua Logic Aqua Logic Aqua Logic Aqua Logic Automation and Chlorination wall mount model table top model Installation/Operation Manual for models AQL-WW-RF-PS-4 AQL-WW-RF-PS-8 Wall Mount models AQL-WW-RF-PS-16 & AQL-Tx-RF-PS-4 AQL-Tx-RF-PS-8 Table Top models AQL-Tx-RF-PS-16 LINE www.goldlinecontrols.com ON TROLS INC .
"RF Base" revision level is shown (the revision should be 1.20 or higher). If the software revision level is less than those specified above, contact the Goldline Technical Service Dept. from Monday through Friday, 8AM to 8PM Eastern at 888- 921-7665 for information on upgrades.
Page 3
Plug the power supply’s output connector into the mating connector on the back of the wireless remote display/keypad. Reattach the wireless remote display/keypad to the baseplate. Plug the power supply into a 120VAC outlet. Wireless Remote Display unit Pull up on bottom edge to remove cover Installation - AQL-Tx-RF-PS-x Table Top models Base Receiver required: For operation of the AQL-Tx-RF-PS-x, the Aqua Logic...
Page 4
Refer to the "Operation" section of this manual for an explanation of each of these displays. NOTE: The built-in NiCad battery pack is available only through Goldline and should offer at least 5 years of service, depending upon use. If the...
Installation - all models Teach the unique Aqua Logic ID code: The base receiver attached to the Aqua Logic control unit has a unique ID code that ensures that your unit will not affect other systems in the neighborhood, and likewise, their remote will not affect your system.
"wake up", all the LED indicators will flash briefly, the display backlight will illuminate, and the following display will appear for a short period of time: Goldline Aqua Logic RF Display r2.00 The "r2.00" is the software revision level. The actual revision level for your wireless remote display/keypad may be different.
"wireless" connector on the main printed circuit board. If this connector is already plugged in (for more than 30 seconds), then call Goldline Technical Service for assistance. "Teach Wireless" failed: Ensure that the remote is powered when pressing the button.
Page 8
Display backlight turns off after a period of time: AQL-WW-RF-PS-x models and AQL-Tx-RF-PSx models running off wall power: The display backlight should always illuminate when you press any key on the unit. If it turns off after a period of time, you can stop this by pressing the menu key (possibly multiple times) until "Settings Menu"...
Page 9
(see diagram on page 2) and write down the model number and serial number. Call the Goldline Tech support department (Monday through Friday, from 8AM to 8PM eastern time) to find out...
Page 10
If the defective product is returned freight prepaid to Goldline more than three (3) years but within five (5) years of the date of the initial system installation, Goldline, at its option, will either repair or replace the defective product and will charge sixty percent (60%) of the current list price for such repairs or replacements, plus shipping charges.
Questions? www.goldlinecontrols.com Refer to for latest manual revisions, additional information and helpful service. Or, you may visit your local Authorized Goldline Dealer or call 888-921-POOL (7665) for assistance. LINE ON TROLS INC . 092045E North Kingstown, RI 02852 USA...
Need help?
Do you have a question about the AQL-WW-RF-PS-4 and is the answer not in the manual?
Questions and answers