Machine Mode Indicators - Husqvarna Viking Huskystar EM10 User Manual

GET READY TO EMBROIDER

Machine Mode Indicators

The machine has modes for specifi c operations. The following are
descriptions of the active mode when the LED lamp is lit beside
these titles on your machine's display.
Select - The select LED light show that you have patterns to
embroider. When this mode is lit, you may use the left and right
Directional buttons to move through the individual designs in
memory. Up and down Directional buttons move forward and
backward by ten designs at a time.
Position - This light is displayed after design selection. You
may position the hoop to a starting point other than center. The
Directional buttons move the hoop in the direction indicated by the
arrow.
Sewing - This LED light is lit when the machine is stitching a design.
If you temporarily have stopped your design by touching the Start/
Stop button it will also be lit.
23