Table of Contents
Advertisement
Quick Links
Model No. IMSB73910
IMSG73910
Serial No.
The serial number is on a sign
behind the access panel. Write the
serial number in the space above.
Access
Panel
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The technicians on our customer
hot line will provide immediate
assistance, free of charge.
CUSTOMER HOT LINE:
1-877-897-7493
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.workoutwarehouse.com
new products, prizes,
fitness tips, and much more!
Advertisement
Table of Contents
Related Manuals for Image IMSB73910
Summary of Contents for Image IMSB73910
- Page 1 Model No. IMSB73910 IMSG73910 USER’S MANUAL Serial No. The serial number is on a sign behind the access panel. Write the serial number in the space above. Access Panel QUESTIONS? If you have questions, or if there are missing parts, we will guar-...
-
Page 2: Table Of Contents
Table of Contents Posting the Warning Sign ..............2 Important Safety Instructions . -
Page 3: Important Safety Instructions
Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the fol- lowing important precautions before using the hydrotherapy spa. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure 10. - Page 4 20. DANGER—Risk of electric shock. Keep all physician before using the hydrotherapy spa. electrical appliances such as radios, tele- Pregnant women should not use the spa if phones, televisions, and lights at least five the water temperature is above 100°F; the feet away from the water.
-
Page 5: Save These Instructions
35. WARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of a localized area of the body may cause bruises to the skin. 36. The included warning sign must be posted where all users of the hydrotherapy spa can see and read it. -
Page 6: Before You Begin
The model number is which is essential in the healing process, and the IMSB73910 or IMSG73910. The serial number can be powerful massage action further eases tension and found on a decal on the access panel inside the spa stress throughout the body. -
Page 7: Choosing A Location For The Hydrotherapy Spa
Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to consider as you decide where to set up the spa. -
Page 8: Assembly
Assembly Before beginning assembly, carefully read the ASSEMBLY REQUIRES THE FOLLOWING following information and instructions: TOOLS (not included): • Place all parts in a cleared area and remove the • One phillips screwdriver packing materials from the spa shell. Do not dis- pose of the packing materials until assembly is A wire connector is provided on the electronics completed and the spa is operating. - Page 9 3. Insert the pillow (47) into the lounge seat recepta- cle. The pillow can be rotated 180º to change between the high or low positions. 4. The hydrotherapy spa operates on a 240 volt power source and must be wired directly to a 240 volt Ground Fault Circuit Interrupter (GFCI) installed in your home.
-
Page 10: Using The Hydrotherapy Spa
Using the Hydrotherapy Spa The hydrotherapy spa is designed to seat seven If the level is too high, add half of one of the “QUICK adults. The spa holds approximately 375 gallons of pHix It DOWN” packets to the water. Let the water cir- water and offers a heating system (80°F to 104°F), a culate through the spa for five minutes. -
Page 11: Spa Shell Diagram
Spa Shell Diagram A. The filters can be removed for cleaning or replace- perature setting (see USING THE CONTROLS on ment (see CHECKING AND CLEANING THE FIL- page 12). TERS on page 13). I. The four air controls regulate the air flow to the B. -
Page 12: Using The Controls
Using the Controls On/Off Valve Air Control 4 Air Controls Display Invert Button 1, 2, and 3 Display Light Pump Pump Temperature Button Button 1 Button 2 Buttons Pump Button 2: Turns the spa jets labeled 1 and 2 (at the left) on and off. If the button is pressed once, the jets will run, providing soothing hydrotherapy. -
Page 13: Maintenance
Maintenance The hydrotherapy spa is designed to provide years of MAINTAINING THE SPA COVER enjoyment. Please follow the guidelines below to properly maintain your spa. The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner MAINTENANCE SCHEDULE on the entire cover. - Page 14 WATER CHEMISTRY ATTACHING AND REMOVING THE ACCESS PANEL The hydrotherapy spa comes with a starter chemical Turn off the spa power. To remove the indicated pack for maintaining the water in the spa. (See TEST- Access Panel (25), Remove the four 1/4” x 20 x 1 1/2” ING AND TREATING THE WATER on page 10.) Machine Screws (46) that secure the Access Panel to Additional chemicals can be purchased at a pool and...
- Page 15 To drain the hydrotherapy spa, follow the steps below: WINTER USE AND CARE 1. Using the console, adjust the temperature to the The hydrotherapy spa is designed for year-round use. lowest setting. If you decide to store the spa for the winter, store it in 2.
-
Page 16: Trouble-Shooting
Trouble-shooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-877-897-7493, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. - Page 17 9. SYMPTOM: THE WATER LEVEL DROPS 10. SYMPTOM: THE SPA JET UNIT CONTINUES TO RUN AFTER IT HAS BEEN SHUT OFF a. A clamp or seal inside the pump compartment may be loose. Check inside the pump compart- a. To turn the main jets off, press pump button 1 ment for excess water and watch the pump unit once or twice.
-
Page 18: Part List
Part List —Model No. IMSB73910/IMSG73910 R0801A Key No. Qty. Description Key No. Qty. Description Thermometer Fitting Trim Plate 3-wire Power Cord Foam, Weir Filter Cover with O-Ring Volcano Jet Filter O-Ring Nozzle Housing Filter Small Rotator Rubber Isolator Large Rotary Jet... -
Page 19: Exploded Drawing
Exploded Drawing —Model No. IMSB73910/IMSG73910) R0801A... -
Page 20: Ordering Replacement Parts
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: 1. The MODEL NUMBER of the product (IMSB73910 or IMSG73910) 2. The NAME of the product (IMAGE ®...