JVC UX-G28 Instructions Manual page 20

Then select a track.
PROG.
MP3 CD
ISPLAY/
PROGRAM
Next program step will be indicated when you program
tracks.
For CD
PROG.
CD
For MP3/WMA
PROG.
MP3 CD
3
Repeat step 2 to program the other tracks.
4
Start playback.
USB
CD
MEMORY
or
The tracks you have selected are played back in the order
you have programmed.
To skip a track: To pause:
To release, press
again.
• Tracks cannot be selected with the Numeric buttons during
Program Play.
15
Track number
To stop:
CD
STOP
or
USB
MEMORY
To check the programmed contents
While the PROG. indicator is shown on the display and
before playback...
DISPLAY/
PROGRAM
To modify the program
While the PROG. indicator is shown on the display and
before playback...
Edit:
1 Press DISPLAY/PROGRAM repeatedly until
displaying the programmed number you want to edit.
2 Repeat the step 2 on page 14.
To add step in the program:
1 Press DISPLAY/PROGRAM repeatedly until
displaying "00" on the display.
2 Repeat the procedure 2 on page 14.
To erase entire program:
STOP
Exit from Program mode at the same time.
All the programs are also erased under the following action:
open CD door, change other sources, turn off the unit.