Gear Sector; Base Tension/Plate Slider/Lever Tension - Aiwa HV-FX7700 Service Manual

DECK MECHANISM DISASSEMBLY
Plate Slider
29. Gear Sector (Fig. A-9-1)
1) Remove the Washer(W1) and lift up the Gear Sector.
30. Base Tension (Fig. A-9-2)/
Plate Slider (Fig. A-9-3)/
Lever Tension (Fig. A-9-4)
1) Remove the Screw(S4) and lift up the Base Tension.
2) Lift up the Plate Slider.
3) Hold the (A) Part of the Lever Tension and turn to the
counterclockwise direction, and then lift up the Lever
Tension.
(W1)
(Fig. A-9-1)
(Fig. A-9-3)
Washer

Gear Sector

(S4)
Lever Tension
(A)
(For Jog Shuttle Models)
Fig. A-9
NOTE
(1) When reassembling, turn the Lever Tension to the clock-
wise direction in maximum.
(2) Push the plate slide right side to be guided by the shaft.
76
Base Tension
(Fig. A-9-2)
(Fig. A-9-4)