Tone Curve Setup - Kenwood DDX6039 Instruction Manual

Before Use

Tone curve setup

You can set a Tone curve.
1
Display the Tone setup screen
T o n e
Tone setup screen
1
2
3
5
4
1 Bass adjustment items are displayed.
2 Middle adjustment items are displayed.
3 Treble adjustment items are displayed.
4 Bass DC Extend settings
If turned "On", it extends the bass center
frequency to the low register by approximately
20%.
5 Tone curve becomes flat.
6 Returns to the Equalizer screen.
• Tone curve can be set for each source.
2
Select a frequency band you wish to adjust
You can adjust the following frequency bands.
Bass: 40, 50, 60, 70, 80, 100, 120, 150 Hz
Middle: 500, 1k, 1.5k, 2k Hz
Treble: 10k, 12.5k, 15k, 17.5k Hz
3
Set a center frequency
FREQ
4
Set a level
5
Set a Q factor
You can set it up only when Bass or Middle is
adjusted.
6
Close the Tone setup screen
6
Sound Effects Menu
Level
Q Factor
English
65
|