Direct Search; Traffic Information - Kenwood DDX6039 Instruction Manual

Direct Search

Tunes in a station when its frequency is entered.
1
Select a band
2
Select the Direct Search mode
3
Enter frequency
—
When you enter frequency, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
• The operation ends automatically if you do not operate
within 10 seconds.
32
|
English
Function of Type M

Traffic Information

When a traffic bulletin starts, any source is switched
to the traffic information and it is displayed
automatically.
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
T U N E R
1
2
Traffic Information
1 Calls the Sound Effects Menu. (page 62)
2 Calls the Setup Menu. (page 42)
• It is necessary to have Traffic Information function set
to On in order to have the Traffic Information screen
appear automatically.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it's automatically
the remembered volume.
13:50