How To Get Started - iRobot Scooba 300 series Owner's Manual

Hide thumbs Also See for Scooba 300 series:
Table of Contents

Advertisement

Dear Scooba Owner
Congratulations and welcome to the world of iRobot! You have
joined the growing number of people who have discovered a
smarter way to clean.
iRobot Scooba is an innovative and easy-to-use product that will change
the way you clean hard fl oors. Scooba frees you to manage other household
tasks while it cleans, so you can wash your hard fl oors more frequently and
get more done.
Thank you for joining the iRobot revolution. We look forward to bringing you
more groundbreaking products that will change and improve your world.
On behalf of the entire iRobot team,
Colin Angle
Chairman, CEO and Co-founder, iRobot Corporation
Looking after your iRobot Scooba
For best results, use it often! Scooba is designed to work with only
Scooba Hard Floor Cleaning Solution or plain tap water. Never use bleach
in Scooba! After every use, rinse the tank, fi lter, and vacuum port. The
brushes do a lot of the hard work, so it's best to take them out and remove
the hair and fl uff that collect around these.
Your Scooba is pretty smart in getting around, but it does need a little help.
Before cleaning, sweep up large debris and clear away any clutter, furniture
and lightweight rugs. General dust, dirt and grime are what it's there for, but
avoid large liquid spills.
Extend the battery life by recharging it as soon as possible and storing your
Scooba plugged in. For long-term storage, charge battery, then remove and
store the battery in a cool, dry place.
*Safety fi rst* As your Scooba contains electrical parts, don't submerge or
spray it with water – clean with a damp cloth only.
CAUTION: DO NOT USE SCOOBA ON THESE SURFACES:
Carpet or rugs, unsealed hardwood, waxed fl oors, or laminate fl ooring
1
iRobot Scooba Owner's Manual

How to get started

Charge Scooba
Pick Scooba up by the handle and set it down on a fl at surface.
1. Press the handle down to release the tank. Remove the tank.
2. Insert the battery by aligning guide tabs and click it into place.
3. Plug in the battery charger and let the battery charge overnight
(fi rst time only).
1
2
Set up Scooba
1. Once Scooba is fully charged, remove the charging plug and remove
the tank.
2. Fill the clean tank with water and optional Scooba Hard Floor Cleaner.
For a shorter cleaning cycle, put less water in the tank. Close tank caps.
3. Place the tank back in Scooba and push the tank down until it clicks
into place.
1
2
Ready to go!
First, sweep up large debris and then place Scooba in the middle
of the room.
• Press POWER to turn Scooba on.
• Press CLEAN to start a cleaning cycle.
Then just walk away and let your Scooba get to work (approximately 45
minutes for a full tank.)
TIP: If you wish to end a cleaning cycle early, activate the internal drying
mode fi rst by pressing CLEAN while Scooba is cleaning. If Scooba is off,
press POWER and then press CLEAN twice.
3
3
global.irobot.com
2

Advertisement

Table of Contents
loading

Table of Contents