If you are having any difficulties, consult an electrician. If you are not knowledgeable about, and comfortable with, electrical circuitry, you should have a qualified electrician install X10 Toggle Wall Switch for you. If you have any questions, please consult an electrician. Page 4 of 7 X10WS467 Rev: 10/7/2011 6:14 PM...
2) Using an X10 controller, send the X10 address you want to assign followed by the ON command three times. For example, to assign the address A1, send “A1 ON A1 ON A1 ON”. X10 Toggle Wall Switch will double-beep and its LED will stop blinking Page 5 of 7 X10WS467 Rev: 10/7/2011 6:14 PM...
A few seconds after you release the Set button, X10 Toggle Wall Switch will double-beep and its LED and load will turn on Specifications View specifications for X10 Toggle Wall Switch at: www.smarthome.com/X10WS467.html Page 6 of 7 X10WS467 Rev: 10/7/2011 6:14 PM...
Need help?
Do you have a question about the X10WS467 and is the answer not in the manual?
Questions and answers