Table of Contents
Advertisement
UDP Checksum Offload (IPv4)
The UDP Checksum Offload (IPv4) function enables the adapter to
compute the UDP checksum of transmitting IPv4 packets and verify the
UDP checksum of receiving IPv4 packets in order to take load off from the
CPU.
To modify the UDP Checksum Offload (IPv4) setting, do the following:
1. Access the Device Manager on your operating system.
See "Accessing Advanced Properties" on page 47.
2. Select UDP Checksum Offload (IPv4) in the Property box.
The UDP Checksum Offload (IPv4) page is displayed as shown in
Figure 45.
Figure 45. UDP Checksum Offload (IPv4) Page
Chapter 4: Modifying Advanced Properties
71
Advertisement
Table of Contents
