Table of Contents
Advertisement
Flow Control
The Flow Control feature allows you to control the flow between the
adapter and its link partner. You can enable or disable the adapter to
process received PAUSE frames and transmit PAUSE frames.
To enable or disable the Flow Control feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 47.
2. Select Flow Control in the Property box.
The Flow Control page is displayed as shown in Figure 28.
3. Select one of the following options:
Disabled — The adapter ignores PAUSE frames.
Tx & Rx Enabled — The adapter processes PAUSE frames when
receiving and transmits PAUSE frames. This is the default setting.
4. Click OK.
Figure 28. Flow Control Page
Chapter 4: Modifying Advanced Properties
49
Advertisement
Table of Contents
