Storage; Winter Storage; Guard; Service - Husqvarna Rider Battery Operator's Manual

Winter storage

At the end of the season, or if the machine is going to stand
idle for more than 30 days, it should immediately be made
ready for storage.
To prepare the machine for storage follow these instructions:
1 Carefully clean the machine, especially under the cutting
unit. Touch-up paint damage to avoid rust.
2 Inspect the machine for worn or damaged parts and
tighten loose screws and nuts.
3 Lubricate all joints and shafts.
4 Clean and maintenance charge the battery.
5 Store the ride-on mower in a frost-free, clean, dry place
and cover it for extra protection.

Guard

There is a cover to protect your machine during storage or
transport. Contact your dealer for a demonstration

Service

Low season is the most suitable time to perform a service or
overhaul of the machine in order to ensure high function
safety during high season.
When ordering spare parts state your machine's purchase
year, model, type, and serial number.
Always use genuine parts.
An annual check-up by an authorised servicing dealer is a
good way to ensure that your ride-on mower performs at its
best the following season.

Storage

– 23
English