Advanced Menu - InFocus IN3924 User Manual

Advanced Menu

Advanced Menu
Image:
3D Control:
3D Control: allows you to enjoy 3D (stereoscopic) content. Your projector
supports two synchronization modes (External Sync and DLP Link™) for
controlling LCD shutter glasses. In addition to the projector, you will need a
pair of 3D shutter glasses, 3D content, and 3D compatible source (and emit-
ter). Ensure the glasses you choose are consistent with the synchronization
mode you will be using.
3D Sync Invert: (Only applies when 3D control is set to DLP Link™.) If the
image appears to flutter, look odd or if the image depth looks off or you
experience eye strain, turn this feature on to see if the image improves.
Color
Color: adjusts a video image from black and white to fully saturated color.
The color setting applies to video sources only.
Red/Green/Blue Gain: adjusts the gain of the red, green or blue channel of the
image.
( )
Advanced Menu
MDL: IN3924
Image 3D Control...
Setup Color...
Status/Service PC...
Video...
Basic Menu
Red/Green/Blue Offset: adjusts the offset of the red, green or blue channel of
the image.
Color Space: applies to computer and component video sources. It allows
you to select a color space that has been specifically tuned for the input signal.
FW: 1.02
When Auto is selected, the projector automatically determines the standard.
To choose a different setting, turn off Auto, then choose RGB for computer
sources or choose either REC709 or REC601 for component video sources.
Color Temp: changes the intensity of the colors. Select a listed relative
warmth value.
Gamma: select the appropriate gamma from among Video, Film, Bright, and
CRT.
Tint: adjusts the red-green color balance in the image of NTSC video images.
The tint setting applies to NTSC video sources only.
White Intensity: increases the brightness of whites that are near 100%.
PC:
Force Wide: when this is off, the analog locking algorithms choose the stan-
dard mode resolution (4:3) as the preferred default resolution. When this is
on, the analog locking algorithms choose wide mode resolution (16:10) as the
preferred default resolution.
Phase: adjusts the horizontal phase of a computer source.
Prevent PC Screen Saver: prevents your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Sync Threshold: (progressive signals only) If a hardware device, such as a
DVD player, is not syncing properly with the projector, select this option to
help it to sync when connected to the projector.
Tracking: adjusts the vertical scan of a computer source.
Horz/Vert Position: adjusts the position of a computer source.
27