Honda HRA214 Owner's Manual page 19

Cutting Height Adjustment
Five settings are available: 1". l-1/2", 2", 2-l/2",
,I
3 .
1. Stop the engine.
2. Push the front and rear adjusting levers toward the
wheels and move them up or down to raise or
lower cutting height. Adjust front and rear wheels
to the same height.
-
* Be careful not to touch the muffler when adjusting
the right front wheel height.
The muffler will stay hot for a while after the
engine is stopped.
A!k-
ADJUSTING LEVER
ADJUSTING LEVER