Hard Drive - ASROCK 1012LW-C2750 User Manual

3.2 Hard Drive

3.2.1 Installing a Hard Disk Drive into 3.5" Hard Drive Carrier
This system allows the routing of cables behind the HDD base plate and carriers. Be sure to
connect all required cables first before installing any of the 3.5" HDDs. Meanwhile, please
well organize your cables and be careful with your cable routing. You can refer to the Quick
Installation Guide for more information.
Removing a 3.5" Hard Drive Carrier from the Chassis
1. Release the thumb screw that secures the hard drive carrier to the base plate.
2. Lift up and remove the carrier from the base plate.
Base Plate
12
2
3.5" HDD Carrier
1