Boss Audio Systems CER122 Specifications

Cer series 12" (30cm) subwoofer

Enlarged version

Technical Support

Congratulations on your purchase of the Boss Audio "CER" Series

If you need technical support with your Boss Audio product or have

Subwoofer. Boss Audio takes great pride in producing products that

questions about its use, please contact us:

look great, sound great, and stand up to the daily rigors applied by

805.751.4853

audio enthusiasts around the world.

www.BossAudio.com

Due to ongoing product development, specifications are subject to change without notice.

Table of Contents

Need help?

Do you have a question about the CER122 and is the answer not in the manual?

Page 1 Technical Support Congratulations on your purchase of the Boss Audio “CER” Series If you need technical support with your Boss Audio product or have Subwoofer. Boss Audio takes great pride in producing products that questions about its use, please contact us: look great, sound great, and stand up to the daily rigors applied by 805.751.4853 audio enthusiasts around the world.
Page 2 Enclosures The CER122 is designed to work in a medium sized sealed or ported enclosure . Since the woofer has pole-vent, it needs a minimum clearance from the rear wall of the enclosure of 0.75” (19 mm). Be- low you will find the dimensions to make the enclosure to suit the subwoofers needs, it has been designed for maximum output while retaining great sound quality.
Page 3 Wiring your Subwoofer Product Specifications 4 Ω Impedance 4 Ω Resonant Frequency 35 Hz 0.61 9.52 0.66 3.083 cu ft. (87.3 liters) Xmax 10 mm Sensitivity (1 W/ 1 m) 87 dB Peak Power Handling 1600 W Mounting Depth 5-3/16” (157.2 mm) Cutout Diameter 11”...