Boss Audio Systems P120F User Manual

12” (30cm) flat subwoofer

Enlarged version

Technical Support

Congratulations on your purchase of the Phantom Flat Subwoofer.

If you need technical support with your Boss Audio product or have

Boss Audio takes great pride in producing products that look great,

questions about its use, please contact us:

sound great, and stand up to the daily rigors applied by audio

805.751.4853

enthusiasts around the world.

www.BossAudio.com

Due to ongoing product development, specifications are subject to change without notice.

Table of Contents

Do you have a question about the P120F and is the answer not in the manual?

Page 1 Technical Support Congratulations on your purchase of the Phantom Flat Subwoofer. If you need technical support with your Boss Audio product or have Boss Audio takes great pride in producing products that look great, questions about its use, please contact us: sound great, and stand up to the daily rigors applied by audio 805.751.4853 enthusiasts around the world.
Page 2 Enclosures The P120F is designed to work in a compact sealed enclosure of only 0.75ft³. Since the woofer has pole-vent, it needs a minimum clearance from the rear wall of the enclosure of 0.75” (19 mm). Below you will find the dimensions to make the enclosure to suit the subwoofers needs, it has been designed for maximum output while retaining great sound quality.
Page 3 Wiring your Subwoofer Product Specifications 4 Ω Impedance 4 Ω Resonant Frequency 44 Hz 1.088 5.143 1.379 1.562 cu ft. (44.2 liters) Xmax 7 mm Sensitivity (1 W/ 1 m) 86 dB Peak Power Handling 1400 W Mounting Depth 3-7/8” (98mm) Cutout Diameter 11”...