D-Link AirPro DWL-AB520 Manual page 17

Using the Configuration Utility
Option
General Setting
Auto Launch
when Windows
starts up-
Advance Setting
Enable Turbo
Mode-
Encryption Type-
Power Save Mode-
Radio Frequency-
Click OK or Apply-
automatically enables the adapter when Windows starts up. By
defaut this option is selected.
disable is the default setting. Make sure all devices in your net-
work have identical settings for Turbo mode
select from Auto, WEP or AES
select from Fast Save, Max. Save or Disable. Default is Fast
Save.
select from 802.11b - 2.4GHz, 802.11a - 5GHz or Auto.
Default is Auto.
click Apply to save the changes; click OK to close the utility
Click on the
About tab
to find out
the firmware
version
17