Options Settings - Creative audigy Rx User Manual

Options Settings

The Options tab allows you to select an Audio Device and set Preferences
Selecting the Audio Device
1. On Sound Blaster Audigy 5/Rx EAX Studio, click the Options tab.
2. From the Audio Device dropdown list, click the device you want to use.
The device is immediately selected.
Testing a Wave file
1. On Sound Blaster Audigy 5/Rx EAX Studio, click the Options tab.
2. Click the Select File button.
3. On the Select Wave File to Audition dialog box, click the Wave file you want, and then click the
OK button.
4. Click the Test button found on either the Master page or Source page.
The selected Wave file is played continuously until you click the Stop button.
For details on testing audio effects, see Managing Your Effects Settings and Modifying an Audio
Effect's Parameters.
Setting Preferences
To ensure that you receive a confirmation from the system whenever you delete an effect, select
l
Always Confirm On Delete checkbox.
If you do not want a confirmation, clear the checkbox.
To ensure that your settings are automatically saved when you close the dialog box, select the
l
Always Save Changes Automatically checkbox.
If you do not want an automatic save on closing, clear the checkbox.
Notes
If the Always Save Changes Automatically option is on, you may accidentally save settings that
l
you do not want. There is no way for you to revert your audio effect to the last-saved setting.
Using Your Sound Blaster Audigy 5/Rx EAX Studio 43