Creative audigy Rx User Manual page 52

Make sure you select the sampling rate of the PCM SPDIF output of your Digital I/O jack to match the
requirements of the receiving device. You may need to select a lower digital output sampling rate. The
choices available are 44.1 kHz, 48 kHz and 96 kHz.
To solve this problem:
1. Go to Start Programs
Audigy 5_Rx Control Panel, and click the Speakers & SPDIF I/O tab.
2. Select the required sampling rate from the Digital Output Sampling Rate list.
Popping noises are heard during playback.
The DMA feature may not be enabled for your computer's drives.
To solve this problem:
1. Go to Start Settings
2. On the System Properties dialog box, click the Hardware tab.
3. Click the Device Manager button.
4. Double-click the ATA/ATAPI IDE Controllers icon.
Your IDE channels will appear.
5. Right-click the Primary IDE Channel icon.
6. Click Properties.
7. On the Properties dialog box, click the Advanced Settings tab.
8. Click the DMA if available checkbox.
9. Click the OK button.
Creative Sound Blaster Audigy 5_Audigy Rx
Control Panel, and double-click the System icon.
Sound Blaster
Troubleshooting and FAQs 52