Creative audigy Rx User Manual page 38

2. Click the Select File button.
3. On the Select Wave File to Audition dialog box, click the Wave file you want, and then click the
OK button.
4. Click the Test button found on either the Master page or Source page.
5. The selected Wave file will play continuously until you click the Stop button.
Testing the effect on Master settings
1. On the Master page, click the audio effect you want to test, and then click the effect to change.
2. Drag slider to determine the value you want. The value is reflected on the Amount column of the
Effects list.
3. The amount set applies even when the effect type is changed.
Repeat this step for every master effect you want to configure.
Testing the effect on Source settings
1. On the Source page, click the source whose effect amount you want to change.
2. Click the Effect and drag slider to determine the amount you want.
The amount is reflected on the Amount column of the Effects list.
Repeat this step for every audio source you want to configure.
3. When you are satisfied with the Amount changes, click the Stop button.
Testing an Effect as you are creating or modifying it
See Modifying an Effect's Parameters.
Notes
If you modify the audio effect but did not save it, what you export will be its last-saved settings. You
l
can use this file to share with your friends the audio effect you have created.
If you want to rename the audio effect, rename the file before importing it or save the imported
l
audio effect using another name.
Using Your Sound Blaster Audigy 5/Rx EAX Studio 38