Midi Settings - Creative audigy 5 User Manual

MIDI Settings

On the MIDI page, you can map effects for MIDI playback. This page allows you
To set the effect amount
l
To insert the controller command when you are authoring a MIDI file in a MIDI sequencer program
l
Configuring effects for MIDI playback
1. On Sound Blaster Audigy 5 EAX Studio, click the MIDI tab.
2. To assign a MIDI controller to an effect, click the Controller value on the Effects list and select from
the dropdown list.
3. To change the effect amount, go to a MIDI sequencer program to specify the Controller value when
you insert the controller command.
4. To assign another MIDI controller to an effect, repeat step 2.
5. When you are satisfied with the configuration, save the settings into the current audio effect or the
factory audio effect.
To save the settings as a new audio effect
i. On the bottom box of the Audio Effects panel, type a new name or the name of an
existing user-defined audio effect, and then click the Save button
ii. If you do not want the audio effect anymore, click the Delete button.
Using Your Sound Blaster Audigy 5 EAX Studio 43