Operation With Pc - Medisana Smart Baby Monitor Instruction Manual

GB

5 Operation with PC

Downloading the software:
To discover the Smart Baby Monitor in your network download the latest version of
the free software for PC or Mac from the software section of our homepage.
(http://www.medisana.com/sbm)
1. Click "Search (F3)" (1) and click on the found device in the list (2).
2. The IP address (3) should be given automatically by DHCP and should be the same
as under "Local PC information", except the circled area above. If this is not the
case, proceed with step 3, otherwise with step 4.
3. Enter the authentication information (4). The factory default setting for "Account for
watching" is "admin" and for "Password for watching" it is "medisana". Click "Update
(F5)" (5).
4. Now click "Search (F3)" (1), on the found device (2) and on "Browse (F4)" (6). The
below security pop-up window will appear. Enter your user name (default: "admin")
and password (default: "medisana") to access the network camera.
7
GB
®
2
select
1
6
admin
medisana
3
4
admin
******
5
Factory default
settings
G
G
G
G
G
G