T200mA 20mm retained for future reference. The mains supply requirement for your Cyrus dAD3 is marked on a label on FOLLOW INSTRUCTIONS: All operating and use instructions should be the rear panel. Before connecting, check that this voltage is the same as your followed.
Switching On Before installing the Cyrus dAD3 check that the following items are The mains power switch h on the rear panel of the Cyrus dAD3 should included in the accessory box. be left on for normal operation, except when left unattended for a long...
1. Memory full indication will show on the display when the program If the disc has more than ten tracks the Cyrus dAD3 will briefly wait for stored exceeds 20 tracks or a stored program time of 100 minutes or entry of a second digit when appropriate.
User Instructions TROUBLESHOOTING GUIDE Laser Product If your Cyrus dAD3 is not operating properly, disconnect the power and This label on the rear panel tells check all connections using the notes in this handbook. If problems you that the unit contains a Laser persist, the checklist below may help.
Need help?
Do you have a question about the dAD3 and is the answer not in the manual?
Questions and answers