Page 3
To enable you to make full use of the comprehensive USA) facilities of the Cyrus DAD7 we would suggest that you read these sections which will explain the fundamental This set complies with 21 CFR 1040.10 and with the FCC- Rules, Part 15.
After removing these items, please retain the packing for avoid any contact with the sensitive optical components. future use. If the Cyrus DAD7 is not to be used for a long period of time, unplug the unit from the mains power supply. LOCATION...
INSTALLATION Cyrus DAD7 Digital Output PSX-R Connection Audio Outputs Power Inlet MC-BUS System Connection Mains Fuse Power Switch Fig.1 DAD7 (rear view) English...
Cyrus DAD7 INSTALLATION In the U.K., the Cyrus DAD7 comes with the mains plug POSITIONING THE UNIT fitted. In the unlikely event that the plug fuse should need The Cyrus DAD7 may be positioned as a free standing replacing ensure that it is only replaced with a 3 Amp unit or alongside a partnering Cyrus Dacmaster or Cyrus Fuse.
Page 7
INSTALLATION Cyrus DAD7 Upgrading with a Cyrus PSX-R Intelligent Power Supply (Optional) When upgrading with a PSX-R Intelligent power supply, only one connection is necessary to the DAD7. The Cannon connector fitted to the umbilical cable on the PSX-R must be securely connected to the socket marked PSX-R on the rear of the DAD7.
Cyrus DAD7 OPERATION Standby Light Previous Track Remote Eye Pause Stop/Open Play Memory Search Forward Repeat Search Reverse Next Track Standby Fig.2 DAD7 (front view) English...
Page 9
OPERATION Cyrus DAD7 Front Panel Display Phase..............Disc Indicator........This symbol lights to show phase inversion. Flashing slowly indicates that the lid is open. Flashing rapidly indicates that the DAD7 is reading the Table of Index / Time Display......Contents from a disc.
7. To prevent any damage to the player or your discs, ensure When the Cyrus DAD7 is in regular use and power is that the disc clamp is always in place before closing the permanently applied, the STANDBY key can be used dust cover.
Page 11
OPERATION Cyrus DAD7 PAUSE REPEAT When the PAUSE key is operated, the player will The REPEAT key can be used for replay of the entire continue to track the disc, holding at the precise point of disc or programmed tracks.
Page 12
Repeat this for up to 20 tracks as required. PHASE PROGRAMMING Note: A special feature of the Cyrus DAD7 is the ability to store The program memory is cleared when the dust cover absolute phase setting within a program sequence. This is opened.
REMOTE CONTROL UNIT Cyrus DAD7 Standby Display Stop Store Repeat Next Track Previous Track Pause Play Fast Forward Fast Rewind Time Display Phase Index Select English...
To store a program from the handset, follow the sequence described on page 11 for storage from the front panel. To Your Cyrus DAD7 can be switched to and from Standby select tracks for programming, use only the NEXT and using the STANDBY key on the handset.
Page 15
REMOTE CONTROL UNIT Cyrus DAD7 Phase Control Mode 3 Remaining time display with arrow pointing right. The time display will read the time The absolute phase of the audio signal can be switched by remaining to the end of the disc or program if use of the remote control PHASE key .
Loudspeakers DAD7 MAINTENANCE Loudspeaker Stands There are no user serviceable parts in the Cyrus DAD7, so there is no reason to remove any of the panels. The Loudspeaker Cables cabinet may be cleaned using a chamois leather, slightly Compact Disc Players moistened with water.
Page 17
The Progress Indicator external power source, while the internal power supply is The progress indicator of the Cyrus DAD7 provides a applied more generously to the other part of the DAD7. useful graphic alternative to the conventional elapsed time This results in a much improved sonic performance of the display.
Page 18
The disc reading mechanism selected by Mission for the It is a proven fact that most electrical cables exhibit Cyrus DAD7 is a new design featuring a monolithic glass directional properties when used for audio application. optical assembly and a high torque motor housed in a rigid This is a complex phenomenon which is to do partly with chassis for stable disc support and long term durability.
TROUBLE SHOOTING GUIDE Pause may have been set. Check for the pause If you suspect that your Cyrus DAD7 is not operating to symbol on the display. Press the pause key again on specification, please read through this section before the front panel or handset to cancel pause.
Page 20
Cyrus DAD7 TROUBLE SHOOTING Skipping tracks or distorted sound. Ensure that the disc clamp is properly seated on the disc surface. The disc may be dirty or badly scratched. Try playing another disc. If the disc is dirty or greasy, refer to the Disc Maintenance section on page 15 for details of disc cleaning.
SPECIFICATIONS Cyrus DAD7 POWER SUPPLY ENCLOSURE Dimensions (WxHxD) Voltage Dust Cover Closed ....... 215 x 78 x 360mm See the plate attached to the rear of the unit. Dust Cover Open........ 215 x 230 x 360mm Weight ...............4.5Kg Power Consumption Material ......
Page 22
The cost of carriage (to or from the Dealer) shall be borne card enclosed is completed by the Dealer and the by the purchaser. purchaser and returned to MISSION or Distributor within This guarantee is personal to the original Purchaser and is 8 days of purchase.
Need help?
Do you have a question about the Cyrus DAD7 and is the answer not in the manual?
Questions and answers