Honda Outboard Motor BF130A Owner's Manual page 94

TAKING CARE OF UNEXPECTED PROBLEMS
ACG Fuse
FUSE CASE LID ''90A''MARK
FUSE (90A)
Disconnect the battery cable at the
battery negative (-) terminal bef ore
replacing the f use.
Failure to do so may cause a short
circuit.
Replacement
1. Stop the engine.
2. Remove the engine cover.
92
3. Remove the fuse case lid.
4. Remove the old fuse by removing
two 5 mm screws.
5. Install a new fuse with the ''90 A''
mark downward.
ACG FUSE:
6. After finishing replacement, install
SPARE FUSE the fuse case lid with its hook
toward the engine side.
7. Be sure to check the fuse case lid
is securely locked.
A spare fuse is located on the reverse
side of the fuse case lid and tightened
with two 3 mm screws.
When the new fuse is set as a spare
fuse on the reverse side of the fuse
case lid, set the fuse so that you can
see the ''90 A'' mark on it.
90 A