D-Link AirPlus G DP-G301 Manual page 80

Networking Basics (continued)
Assigning a Static IP Address in Windows XP/2000
Click Internet Protocol

(TCP/IP)
Click Properties

Select Use the following

IP address in the
Internet Protocol (TCP/
IP) Properties window.
Input your IP address and

subnet mask. (The IP
addresses on your network
must be within the same
range. For example, if
one computer has an IP
address of 192.168.0.2,
the other computers should
have IP addresses that are
sequential, like 192.168.0.3
and 192.168.0.4. The
subnet mask must be the
same for all the computers
on the network.)
Input your DNS server

addresses. (Note: If
you are entering a DNS
server, you must enter the
IP address of the Default
Gateway.)
The DNS server information will be supplied
by your ISP (Internet Service Provider.)
Click OK
80