D-Link AirPlus G DP-G301 Manual page 6

Rear Panel LED Indicator / Connectors
Power
A steady lit LED indicates proper operation of the Print
Server.
ACT
A steady lit LED indicates proper wired or wireless network
connection. A flicker LED indicates acitivity (configuation or
printing)
LPT
A steady lit LED indicates your Parallel printer is printing.
Network Cable Connector
The Print Server rear panel has a LAN port for CAT5 Ethernet
cabling. The port supports the NWay protocol, allowing the Print
Server to automatically detect or negotiate the transmission
speed of the network.
DC Power Connector
The DC power input connectors is located on the Print Server's
rear panel and is labeled DC 5V.
Antenna
Power connector
Ethernet ACT Power
LPT
6